FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH

  4. REMOVE FRONT FENDER APRON SEAL RH

  5. REMOVE V-RIBBED BELT


    1. A01EVVHE01

      Using SST, slowly turn the V-ribbed belt tensioner assembly clockwise.

      Note


      • Make sure that SST and other tools are set to the V-ribbed belt tensioner assembly securely.

      • When compressing the V-ribbed belt tensioner assembly, slowly turn the V-ribbed belt tensioner assembly.

      SST
      09216-42010

    2. Remove the V-ribbed belt from each pulley and slowly return the V-ribbed belt tensioner assembly.

  6. REMOVE CRANKSHAFT PULLEY


    1. A01EUOOE01
      Text in Illustration
      *a Hold
      *b Turn

      Using SST, hold the crankshaft pulley and loosen the pulley bolt. Further loosen the bolt until 2 or 3 threads are screwed into the crankshaft.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
    2. A01EYMME01
      Text in Illustration
      *1 Pulley Bolt
      *a Hold
      *b Turn

      Using SST and the pulley bolt, remove the crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )

      Tech Tips

      Apply a lubricant to the threads and end of SST.

  7. REMOVE TIMING CHAIN COVER OIL SEAL


    1. A01EV9YE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, pry out the timing chain cover oil seal.

      Note


      • Tape the screwdriver tip before use.

      • Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft.