VACUUM SWITCHING VALVE (for Engine Mounting) INSTALLATION


  1. INSTALL DUTY VACUUM SWITCHING VALVE


    1. A01EUJIE01

      Connect the vacuum hose and vacuum switching valve connector.

    2. Install the duty vacuum switching valve with the bolt.

      Tech Tips

      Hose A: Large hose

      Torque:
      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }
    3. A01ESY6E01

      Connect the 2 vacuum hoses to the duty vacuum switching valve.

      Tech Tips

      Hose B: Dummy hose (not used for ventilation, the other end is plugged)

    4. Connect the hose.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. INSTALL ENGINE UNDER COVER LH

  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

  5. INSTALL ENGINE UNDER COVER RH

  6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH