CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01EX8D

      Remove the 2 nuts and No. 1 engine cover sub-assembly.

  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A01EV7D

      Disconnect the vacuum switching valve connector.

    2. Disconnect the 2 vacuum switching valve vacuum hoses.

    3. Disconnect the purge line hose from the 2 clamps.

    4. Disconnect the mass air flow meter connector.

    5. Disconnect the wire harness clamp.

    6. Loosen the 2 bolts and separate the air cleaner cap sub-assembly.

    7. A01EW34

      Disconnect the ventilation hose from the cylinder head cover sub-assembly.

    8. A01EX2PE01
      Text in Illustration
      *1 Air Cleaner Hose Clamp

      Lock the air cleaner hose clamp as shown in the illustration, and disconnect the air cleaner cap sub-assembly from the throttle with motor body assembly.

    9. Remove the air cleaner filter element from the air cleaner case sub-assembly.

  3. DISCONNECT VENTILATION HOSE


    1. A01EW34

      Disconnect the ventilation hose from the cylinder head cover sub-assembly.

  4. REMOVE CAMSHAFT POSITION SENSOR


    1. A01EZ2U

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor.