KNOCK SENSOR INSTALLATION

Perform "Inspection After Repair" after replacing the knock control sensor Click here.

1. INSTALL KNOCK CONTROL SENSOR

   
   
   1. 

      Text in Illustration

      *a	Front of Engine
      *b	Up
      *c	7°
      *d	10°

      Install the sensor with the bolt so that the sensor is angled as shown in the illustration.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      The acceptable installation angle of the sensor is between 7° upward and 10° downward from the horizontal position.

      Tech Tips

      Perform "Inspection After Repair" after replacing the knock control sensor Click here

   2. Connect the sensor connector.

2. INSTALL INTAKE MANIFOLD

   Click here