ВПУСКНОЙ КОЛЛЕКТОР СНЯТИЕ


  1. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  2. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A003YQK

      Отсоедините разъем.

    2. Выверните болт и снимите датчик абсолютного давления в коллекторе.

  3. REMOVE PURGE VSV


    1. A003ZVC

      Отсоедините разъем и 2 питающих шланга паров топлива.

    2. A003ZCI

      Выверните болт и снимите электровакуумный клапан продувки.

  4. REMOVE INTAKE MANIFOLD


    1. A003WJV

      Disconnect the 2 wire harness clamps.

    2. A003WQ0

      Remove the bolt and wire harness support.

    3. A003ZUX

      Remove the 2 bolts and surge tank cover.

    4. Remove the gasket from the intake manifold.

    5. A003ZLL

      Disconnect the 3 connectors and 2 wire harness clamps.

    6. Remove the engine oil level dipstick.

    7. A003XWA

      Disconnect the wire harness clamp, and then remove the 2 bolts and engine oil level dipstick guide sub-assembly.

    8. Remove the O-ring from the engine oil level dipstick guide sub-assembly.

    9. A003VBE

      Disconnect the fuel vapor feed hose and ventilation hose.

    10. A003VFZ

      Remove the 2 bolts, 2 nuts and intake manifold.

    11. Remove the No. 1 intake manifold to head gasket.

    12. w/ Stud Bolt:


      1. A003Y6A

        Using an E6 "TORX" socket wrench, remove the 2 stud bolts.

        Tech Tips

        If a stud bolt is deformed or the threads are damaged, replace it.