POWER WINDOW REGULATOR MOTOR(for Rear Door) INSPECTION

PROCEDURE

1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

   Note

   
   

   • Do not apply positive (+) battery voltage to any terminals other than terminals 1 and 2 to avoid damaging the pulse sensor inside the motor.

   • When a power window regulator or a power window regulator motor assembly is replaced, the power window control system must be initialized Click here.

   
   
   1. 

      Text in Illustration

      *1	Motor Gear
      *a	Component without harness connected (Power Window Regulator Motor Assembly RH)
      *b	Clockwise
      *c	Counterclockwise

      Check the motor gear rotates smoothly as follows.

      OK

      Measurement Condition	Specified Condition
      Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2	Motor gear rotates clockwise
      Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1	Motor gear rotates counterclockwise

2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

   Note

   
   

   • Do not apply positive (+) battery voltage to any terminals other than terminals 1 and 2 to avoid damaging the pulse sensor inside the motor.

   • When a power window regulator or a power window regulator motor assembly is replaced, the power window control system must be initialized Click here.

   
   
   1. 

      Text in Illustration

      *1	Motor Gear
      *a	Component without harness connected (Power Window Regulator Motor Assembly LH)
      *b	Counterclockwise
      *c	Clockwise

      Check the motor gear rotates smoothly as follows.

      OK

      Measurement Condition	Specified Condition
      Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1	Motor gear rotates clockwise
      Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2	Motor gear rotates counterclockwise