POWER WINDOW MASTER SWITCH INSPECTION

PROCEDURE


  1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

    A005L3OE01

    1. for LHD (w/o Rear Power Window)
      Check that the resistance.

      1. Measure the resistance according to the value(s) in the table below.

        Text in Illustration
        *1 Window Lock Switch
        *2 Front Passenger Switch
        *3 Driver Switch
        *a

        Component without harness connected

        (Power Window Regulator Master Switch Assembly)
        *b Driver Side
        *c Passenger Side
        Standard resistance
        Driver Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition

        Always

        (ON/OFF)

        		 UP AUTO

        1 (AUTO) - 7 (GND)

        18 (UP) - 7 (GND)

        10 (DOWN) - 15 (B)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 UP MANUAL

        10 (DOWN) - 15 (B)

        18 (UP) - 7 (GND)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 OFF

        10 (DOWN) - 18 (UP)

        15 (B) - 18 (UP)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 DOWN MANUAL

        10 (DOWN) - 7 (GND)

        15 (B) - 18 (UP)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 DOWN AUTO

        1 (AUTO) - 7 (GND)

        10 (DOWN) - 7 (GND)

        15 (B) - 18 (UP)

        		 Below 1 Ω
        Standard resistance
        Passenger Side Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition
        OFF UP

        16 (D) - 7 (GND)

        12 (U) - 15 (B)

        		 Below 1 Ω
        OFF OFF

        12 (U) - 7 (GND)

        16 (D) - 7 (GND)

        		 Below 1 Ω
        OFF DOWN

        12 (U) - 7 (GND)

        15 (B) - 16 (D)

        		 Below 1 Ω
        ON UP 12 (U) - 15 (B) Below 1 Ω
        ON OFF 12 (U) - 16 (D) Below 1 Ω
        ON DOWN 15 (B) - 16 (D) Below 1 Ω
    2. for LHD (w/o Rear Power Window)
      Check the illumination operation.

      1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 6 (LED)

        Battery negative (-) → Terminal 7 (GND)

        		 Illumination comes on
    3. A005HRLE01
      for RHD (w/o Rear Power Window)
      Check that the resistance.

      1. Measure the resistance according to the value(s) in the table below.

        Text in Illustration
        *1 Window Lock Switch
        *2 Driver Switch
        *3 Front Passenger Switch
        *a

        Component without harness connected

        (Power Window Regulator Master Switch Assembly)
        *b Driver Side
        *c Passenger Side
        Standard resistance
        Driver Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition

        Always

        (ON/OFF)

        		 UP AUTO

        18 (AUTO) - 7 (GND)

        9 (UP) - 7 (GND)

        6 (DOWN) - 15 (B)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 UP MANUAL

        6 (DOWN) - 15 (B)

        9 (UP) - 7 (GND)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 OFF

        6 (DOWN) - 9 (UP)

        15 (B) - 9 (UP)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 DOWN MANUAL

        6 (DOWN) - 7 (GND)

        15 (B) - 9 (UP)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 DOWN AUTO

        18 (AUTO) - 7 (GND)

        6 (DOWN) - 7 (GND)

        15 (B) - 9 (UP)

        		 Below 1 Ω
        Standard resistance
        Passenger Side Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition
        OFF UP

        10 (D) - 7 (GND)

        12 (U) - 15 (B)

        		 Below 1 Ω
        OFF OFF

        12 (U) - 7 (GND)

        10 (D) - 7 (GND)

        		 Below 1 Ω
        OFF DOWN

        12 (U) - 7 (GND)

        15 (B) - 10 (D)

        		 Below 1 Ω
        ON UP 12 (U) - 15 (B) Below 1 Ω
        ON OFF 12 (U) - 10 (D) Below 1 Ω
        ON DOWN 15 (B) - 10 (D) Below 1 Ω
    4. for RHD (w/o Rear Power Window)
      Check the illumination operation.

      1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 6 (LED)

        Battery negative (-) → Terminal 7 (GND)

        		 Illumination comes on
    5. A005L66E01
      for LHD (w/ Rear Power Window)
      Check that the resistance.

      1. Measure the resistance according to the value(s) in the table below.

        Text in Illustration
        *1 Window Lock Switch
        *2 Front Passenger Switch
        *3 Driver Switch
        *4 Rear RH Side Switch
        *5 Rear LH Side Switch
        *a

        Component without harness connected

        (Power Window Regulator Master Switch Assembly)
        *b Driver Side
        *c Passenger Side
        *d Rear LH Side
        *e Rear RH Side
        Standard resistance
        Driver Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition

        Always

        (ON/OFF)

        		 UP AUTO

        1 (GND) - 8 (UP)

        1 (GND) - 4 (AUTO)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 UP MANUAL

        1 (GND) - 8 (UP)

        5 (DOWN) - 6 (B)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 OFF

        5 (DOWN) - 8 (UP)

        6 (B) - 8 (UP)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 DOWN MANUAL

        1 (GND) - 5 (DOWN)

        6 (B) - 8 (UP)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 DOWN AUTO

        1 (GND) - 5 (DOWN)

        1 (GND) - 4 (AUTO)

        6 (B) - 8 (UP)

        		 Below 1 Ω
        Standard resistance
        Passenger Side Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition
        OFF UP

        6 (B) - 16 (U)

        1 (GND) - 15 (D)

        		 Below 1 Ω
        OFF OFF

        1 (GND) - 16 (U)

        1 (GND) - 15 (D)

        		 Below 1 Ω
        OFF DOWN

        6 (B) - 15 (D)

        1 (GND) - 16 (U)

        		 Below 1 Ω
        ON UP 6 (B) - 16 (U) Below 1 Ω
        ON OFF 15 (D) - 16 (U) Below 1 Ω
        ON DOWN 6 (B) - 15 (D) Below 1 Ω
        Standard resistance
        Rear LH Side Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition
        OFF UP

        6 (B) - 12 (U)

        1 (GND) - 13 (D)

        		 Below 1 Ω
        OFF OFF

        1 (GND) - 12 (U)

        1 (GND) - 13 (D)

        		 Below 1 Ω
        OFF DOWN

        6 (B) - 13 (D)

        1 (GND) - 12 (U)

        		 Below 1 Ω
        ON UP 6 (B) - 12 (U) Below 1 Ω
        ON OFF 12 (U) - 13 (D) Below 1 Ω
        ON DOWN 6 (B) - 13 (D) Below 1 Ω
        Standard resistance
        Rear RH Side Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition
        OFF UP

        6 (B) - 10 (U)

        1 (GND) - 18 (D)

        		 Below 1 Ω
        OFF OFF

        1 (GND) - 10 (U)

        1 (GND) - 18 (D)

        		 Below 1 Ω
        OFF DOWN

        6 (B) - 18 (D)

        1 (GND) - 10 (U)

        		 Below 1 Ω
        ON UP 6 (B) - 10 (U) Below 1 Ω
        ON OFF 10 (U) - 18 (D) Below 1 Ω
        ON DOWN 6 (B) - 18 (D) Below 1 Ω
    6. for LHD (w/ Rear Power Window)
      Check the illumination operation.

      1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 3 (LED)

        Battery negative (-) → Terminal 1 (GND)

        		 Illumination comes on
    7. A005JIKE01
      for RHD (w/ Rear Power Window)
      Check that the resistance.

      1. Measure the resistance according to the value(s) in the table below.

        Text in Illustration
        *1 Window Lock Switch
        *2 Driver Switch
        *3 Front Passenger Switch
        *4 Rear RH Side Switch
        *5 Rear LH Side Switch
        *a

        Component without harness connected

        (Power Window Regulator Master Switch Assembly)
        *b Driver Side
        *c Passenger Side
        *d Rear LH Side
        *e Rear RH Side
        Standard resistance
        Driver Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition

        Always

        (ON/OFF)

        		 UP AUTO

        1 (UP) - 9 (GND)

        4 (AUTO) - 9 (GND)

        5 (DOWN) - 6 (B)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 UP MANUAL

        1 (UP) - 9 (GND)

        5 (DOWN) - 6 (B)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 OFF

        1 (UP) - 5 (DOWN)

        1 (UP) - 6 (B)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 DOWN MANUAL

        5 (DOWN) - 9 (GND)

        1 (UP) - 6 (B)

        		 Below 1 Ω

        Always

        (ON/OFF)

        		 DOWN AUTO

        5 (DOWN) - 9 (GND)

        4 (AUTO) - 9 (GND)

        1 (UP) - 6 (B)

        		 Below 1 Ω
        Standard resistance
        Passenger Side Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition
        OFF UP

        6 (B) - 12(U)

        9 (GND) - 13 (D)

        		 Below 1 Ω
        OFF OFF

        9 (GND) - 12(U)

        9 (GND) - 13 (D)

        		 Below 1 Ω
        OFF DOWN

        6 (B) - 13 (D)

        9 (GND) - 12(U)

        		 Below 1 Ω
        ON UP 6 (B) - 12(U) Below 1 Ω
        ON OFF 13 (D) - 12(U) Below 1 Ω
        ON DOWN 6 (B) - 13 (D) Below 1 Ω
        Standard resistance
        Rear LH Side Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition
        OFF UP

        6 (B) - 18 (U)

        9 (GND) - 10 (D)

        		 Below 1 Ω
        OFF OFF

        9 (GND) - 18 (U)

        9 (GND) - 10 (D)

        		 Below 1 Ω
        OFF DOWN

        6 (B) - 10 (D)

        9 (GND) - 18 (U)

        		 Below 1 Ω
        ON UP 6 (B) - 18 (U) Below 1 Ω
        ON OFF 18 (U) - 10 (D) Below 1 Ω
        ON DOWN 6 (B) - 10 (D) Below 1 Ω
        Standard resistance
        Rear RH Side Switch
        Window Lock Switch Condition Power Window Switch condition Tester connection Specified condition
        OFF UP

        6 (B) - 16 (U)

        9 (GND) - 15 (D)

        		 Below 1 Ω
        OFF OFF

        9 (GND) - 16 (U)

        9 (GND) - 15 (D)

        		 Below 1 Ω
        OFF DOWN

        6 (B) - 15 (D)

        9 (GND) - 16 (U)

        		 Below 1 Ω
        ON UP 6 (B) - 16 (U) Below 1 Ω
        ON OFF 16 (U) - 15 (D) Below 1 Ω
        ON DOWN 6 (B) - 15 (D) Below 1 Ω
    8. for RHD (w/ Rear Power Window)
      Check the illumination operation.

      1. Apply battery voltage to the power window regulator master switch and check that the illumination comes on.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 3 (LED)

        Battery negative (-) → Terminal 9 (GND)

        		 Illumination comes on