ROOF SUNSHADE SWITCH INSPECTION

PROCEDURE


  1. INSPECT SLIDE ROOF MOTOR SWITCH


    1. A005KSZE01
      Text in Illustration
      *1 Map Light Assembly
      *2 Slide Roof Motor Switch
      *a

      Component without harness connected

      (Slide Roof Motor Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (OPN) - 3 (E) OPEN switch is pressed Below 1 Ω
      2 (CLS) - 3 (E) CLOSE switch is pressed Below 1 Ω

      If the result is not as specified, replace the sliding roof motor switch (map light assembly).