ROOF SUNSHADE INSTALLATION

PROCEDURE


  1. INSTALL SLIDING ROOF HOUSING SUB-ASSEMBLY


    1. Engage the 2 clips and install the sliding roof housing sub-assembly.

      A005KQD

    2. Install the 7 nuts.

      Torque:
      6.7 N*m  { 68 kgf*cm, 59 in.*lbf }

    3. Install the bracket with 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSPECT SRS WARNING LIGHT

    Click here

  5. RESET SLIDING ROOF DRIVE GEAR ASSEMBLY

    Click here

  6. INSPECT ROOF SUNSHADE

    Click here