ROOF SUNSHADE REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY


    1. A005HR3

      Remove the 2 bolts and the bracket.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. Remove the 7 nuts.

      A005KQD

    3. Disengage the 2 clips and remove the sliding roof housing sub-assembly.