ROOF HEADLINING REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A005KQK

      Disengage the 9 claws and remove the front door scuff plate LH.

  3. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  4. REMOVE COWL SIDE TRIM BOARD LH


    1. A005LOL

      Remove the clip.

    2. Disengage the claw and remove the cowl side trim board LH.

  5. REMOVE COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  6. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. A005GRV

      Remove the front door opening trim weatherstrip LH.

  7. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  8. REMOVE FRONT PILLAR GARNISH CORNER PIECE LH


    1. A005GG0

      Disengage the 5 claws and 2 guides, remove the front pillar garnish corner piece LH.

  9. REMOVE FRONT PILLAR GARNISH CORNER PIECE RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  10. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

    Note

    Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.


    1. A005HWLE02
      Text in Illustration
      *1 Front Pillar Garnish Clip

      Disengage the front pillar garnish clip and the clip.

      Tech Tips

      The front pillar garnish clip should be remained between the front pillar garnish LH and the pillar.

    2. A005INEE01
      Text in Illustration
      *1 Protective Tape
      *a 90 degrees

      Using needle nose pliers, turn the front pillar garnish clip 90 degrees and disengage it from the front pillar garnish LH.

      Note


      • Wrap the needle nose pliers with protective tape before use.


      • As a pillar garnish clip is reusable, do not remove it from the pillar as long as it is not damaged.


      • If the front pillar garnish is removed, replace it with a new one.

    3. Disengage the guide and remove the front pillar garnish LH.

    4. A005GI9E01
      Text in Illustration
      *1 Adhesive Tape
      *2 Protective Cover

      Completely cover the airbag with a cloth or nylon sheet and secure the ends of the cover with adhesive tape as shown in the illustration.

  11. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

    Tech Tips

    Use the same procedure for the LH side and RH side.

  12. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)


    1. A005M7X

      Disengage the 2 clips and guide, remove the front pillar garnish LH.

  13. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure for the LH side and RH side.

  14. REMOVE REAR DOOR SCUFF PLATE LH


    1. A005I9S

      Disengage the 6 claws and guide, remove the rear door scuff plate LH.

  15. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  16. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. A005IOY

      Remove the rear door opening trim weatherstrip LH.

  17. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  18. REMOVE DECK BOARD ASSEMBLY


    1. A005HOT

      Remove the deck board assembly.

  19. REMOVE REAR DECK FLOOR BOX (w/ Rear Deck Floor Box)


    1. A005JHL

      Remove the rear deck floor box.

  20. REMOVE BACK DOOR WEATHERSTRIP


    1. A005HD0

      Remove the back door weatherstrip.

  21. REMOVE REAR DECK TRIM COVER


    1. A005JND

      Disengage the 4 clips and 4 claws.

    2. Disengage the 2 guides and remove the rear deck trim cover in the direction indicated by the arrow as shown in the illustration.

  22. REMOVE REAR FLOOR REAR MAT (w/o Rear Deck Floor Box)


    1. A005GSE

      Disengage the 5 clips and remove the rear floor rear mat.

  23. REMOVE LUGGAGE ROOM BOX SEPARATOR


    1. A005I4K

      Disengage the 7 clips.

    2. A005KVJ

      Remove the 2 bolts.

    3. Disengage the 2 guides and remove the luggage room box separator in the direction indicated by the arrow as shown in the illustration.

  24. REMOVE DECK SIDE TRIM BOX LH (w/o Rear Deck Floor Box)


    1. A005GUM

      Remove the 2 bolts.

    2. Disengage the 2 claws and remove the deck side trim box LH.

  25. REMOVE DECK SIDE TRIM BOX RH (w/o Rear Deck Floor Box)

    Tech Tips

    Use the same procedure for the LH side and RH side.

  26. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY


    1. A005J43

      Remove the bolt and the luggage hold belt striker assembly.

      Tech Tips

      Use the same procedure for the LH side and RH side.

  27. REMOVE RECLINING REMOTE CONTROL BEZEL LH


    1. A005JXUE01
      Text in illustration
      *1 Protective Tape

      Using a screw driver with its tip wrapped with protective tape, disengage the 2 claws and guide, remove the reclining remote control bezel LH.

      Tech Tips

      Use the same procedure for the LH side and RH side.

  28. REMOVE RECLINING REMOTE CONTROL BEZEL RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  29. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. A005GOP

      Remove the bolt.

    2. A005KQOE01
      Text in illustration
      *1 Clip
      *2 Rear Seat Reclining Control Cable
      *3 Cap

      Slide up the clip and detach the rear seat reclining control cable cap as shown in the illustration.

    3. A005KZL

      Remove the 3 screws.

    4. Using a clip remover, disengage the 4 clips.

    5. Disengage the 4 claws and guide, and remove the deck trim side panel assembly LH.

    6. Disconnect each connector. (for LH Side)

    7. A005M7A

      Remove the rear seat reclining control cable clamp.

    8. A005MJ3E02

      Disengage the claw.

    9. Disconnect the rear seat reclining control cable from the rear seat lock control lever sub-assembly in the order shown in the illustration.

      Text in illustration
      *1 Rear Seat Reclining Control Cable
      *2 Rear Seat Lock Control Lever Sub-assembly
    10. A005MF0E01
      Text in illustration
      *1 Rear No. 1 Seat Lock Cable Assembly
      *2 Rear Seat Reclining Control Cable

      Disconnect the rear seat reclining control cable from the rear No. 1 seat lock cable assembly as shown in the illustration.

  30. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  31. REMOVE NO. 2 ROOM LIGHT ASSEMBLY

    Click here

  32. REMOVE DECK TRIM SIDE SERVICE HOLE COVER (w/o Power Outlet Socket)


    1. A005K5S

      Disengage the 2 claws and remove the deck trim side service hole cover.

  33. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY (w/ Power Outlet Socket)

    Click here

  34. REMOVE REAR POWER OUTLET SOCKET COVER (w/ Power Outlet Socket)

    Click here

  35. REMOVE REAR ABSORBER CAP


    1. A005JRV

      Disengage the 2 claws and 2 guides, remove the rear absorber cap.

      Tech Tips

      Use the same procedure for the LH side and RH side.

  36. REMOVE REAR SEAT SHOULDER BELT HANGER


    1. A005JWL

      Disengage the claw and guide, remove the rear seat shoulder belt hanger.

      Tech Tips

      Use the same procedure for the LH side and RH side.

  37. REMOVE REAR SEAT ASSEMBLY

    Click here

  38. SEPARATE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    Click here

  39. SEPARATE REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  40. REMOVE ROOF SIDE INNER GARNISH LH


    1. A005LU6

      Disengage the 8 clips and remove the roof side inner garnish LH.

  41. REMOVE ROOF SIDE INNER GARNISH RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  42. REMOVE LAP BELT OUTER ANCHOR COVER

    Click here

  43. SEPARATE FRONT SEAT OUTER BELT ASSEMBLY LH

    Click here

  44. SEPARATE FRONT SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  45. REMOVE CENTER PILLAR LOWER GARNISH LH


    1. A005KT0

      Disengage the 2 clips and 2 claws.

    2. Disengage the 2 guides and remove the center pillar lower garnish LH.

  46. REMOVE CENTER PILLAR LOWER GARNISH RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  47. REMOVE CENTER PILLAR UPPER GARNISH LH


    1. A005J4C

      Remove the bolt.

    2. Disengage the clip and guide, remove the center pillar upper garnish LH.

  48. REMOVE CENTER PILLAR UPPER GARNISH RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  49. REMOVE ASSIST GRIP COVER


    1. A005K8KE01
      Text in Illustration
      *1 Moulding Remover
      *a Slightly pry this up

      Using a moulding remover, disengage the 4 claws.

      Note

      Do not forcibly pry the assist grip covers to prevent them from being deformed.

      Tech Tips

      Gently pry on the assist grip covers as shown in the illustration to remove them.

    2. Pull off the 2 assist grip covers by hand.

      Tech Tips

      Use the same procedure for all the assist grip covers.

  50. REMOVE ASSIST GRIP ASSEMBLY


    1. A005K0OE02
      Text in Illustration
      *1 Spring

      Disengage the 2 springs and remove the assist grip.

    2. Remove the 2 springs from the vehicle body.

      Tech Tips

      Use the same procedure for all the assist grips.

  51. REMOVE MAP LIGHT ASSEMBLY (for Glass Roof)

    Click here

  52. REMOVE MAP LIGHT ASSEMBLY (except Glass Roof)

    Click here

  53. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

    Click here

  54. REMOVE RAIN SENSOR COVER (w/ Rain Sensor)

    Click here

  55. REMOVE RAIN SENSOR (w/ Rain Sensor)

    Click here

  56. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

    Click here

  57. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER

    Click here

  58. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

    Click here

  59. REMOVE VISOR BRACKET COVER LH


    1. A005JGE

      Disengage the 4 claws and remove the visor bracket cover LH.

  60. REMOVE VISOR BRACKET COVER RH

    Tech Tips

    Use the same procedure for the LH side and RH side.

  61. REMOVE VISOR ASSEMBLY LH

    A005HJ4

    1. Separate the visor assembly LH from the visor holder.

    2. Disengage the 2 clips and remove the visor assembly.

  62. REMOVE VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure for the visor assembly.

  63. REMOVE VISOR HOLDER


    1. A005J9AE04
      Text in Illustration
      *a 45 degrees

      Turn the visor holder clockwise 45 degrees and disengage the 2 claws to remove the visor holder.

      Tech Tips

      Use the same procedure for the LH side and RH side.

  64. REMOVE ROOF HEADLINING ASSEMBLY


    1. A005JC8

      Disconnect the connector.

    2. Disengage the 2 clamps.

    3. A005LDT

      Disconnect the connector.

    4. Disengage the 2 clamps.

    5. A005M6U

      Disconnect the connector.

    6. Disengage the 3 clamps.

    7. A005ITN

      Using a clip remover, disengage the 2 clips.

    8. A005HFF

      Disconnect the connector (for grass roof).

    9. Using a clip remover, disengage the clamp (for grass roof).

    10. Disengage the 15 hook-and loop fasteners (for grass roof).

      A005IHI
    11. A005L9B

      Remove the roof headlining from the vehicle through the back door as shown in the illustration.

      Note

      Do not damage the roof headlining assembly or body interior.

  65. REMOVE CURTAIN SHIELD AIR BAG ASSEMBLY LH (w/ Curtain Shield Airbag)

    Click here

  66. REMOVE CURTAIN SHIELD AIR BAG ASSEMBLY RH (w/ Curtain Shield Airbag)

    Tech Tips

    Use the same procedure for the LH side and RH side.

  67. REMOVE FRONT SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)


    1. A005JGJ

      Disengage the 5 claws and remove the front side rail spacer LH.

  68. REMOVE FRONT SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure for the LH side and RH side.

  69. REMOVE REAR SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)


    1. A005LRS

      Disengage the 5 claws and remove the rear side rail spacer LH.

  70. REMOVE REAR SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure for the LH side and RH side.

  71. REMOVE REAR NO. 2 SIDE RAIL SPACER LH (w/ Curtain Shield Airbag)

    A005KJI

    1. Disengage the 2 claws and remove the rear No. 2 side rail spacer LH.

  72. REMOVE REAR NO. 2 SIDE RAIL SPACER RH (w/ Curtain Shield Airbag)

    Tech Tips

    Use the same procedure for the LH side and RH side.

  73. REMOVE ROOF SIDE RAIL BRACKET LH (w/ Curtain Shield Airbag)


    1. A005I00

      Remove the 2 bolts and the rear side rail bracket LH.

  74. REMOVE ROOF SIDE RAIL BRACKET RH (w/ Curtain Shield Airbag)

    Tech Tips

    Use the same procedure for the LH side and RH side.