CONDENSER(for 1ND-TV) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE FRONT BUMPER COVER

    Click here

  6. REMOVE HEADLIGHT ASSEMBLY

    Click here

  7. REMOVE CENTER ENGINE UNDER COVER

    Click here

  8. REMOVE RADIATOR RESERVE TANK ASSEMBLY

    Click here

  9. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    Click here

  10. SEPARATE HOOD LOCK ASSEMBLY

    Click here

  11. DISCONNECT NO. 1 RADIATOR HOSE

    Click here

  12. DISCONNECT NO. 2 RADIATOR HOSE

    Click here

  13. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A005JEE

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  14. DISCONNECT LIQUID TUBE SUB-ASSEMBLY A


    1. A005HVY

      Remove the bolt and disconnect the liquid tube sub-assembly A from the cooler condenser assembly.

    2. Remove the O-ring from the liquid tube sub-assembly A.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  15. REMOVE COOLER CONDENSER ASSEMBLY

    A005LXK

    1. Remove the bolt.

    2. Disengage the clamp.

    3. A005HEB

      Remove the condenser with radiator assembly from the vehicle.

    4. A005KBK

      Disengage the 2 claws.

    5. A005JRN

      Disengage the 2 guides and remove the cooler condenser assembly from the radiator assembly as shown in the illustration.

      Note

      Do not damage the cooler condenser assembly or radiator assembly when removing the cooler condenser assembly.