COMPRESSOR(for 1NR-FE) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  4. REMOVE FRONT BUMPER COVER

    Click here

  5. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  6. REMOVE FAN AND GENERATOR V BELT

    Click here

  7. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A005JCA

      Remove the bolt and disconnect the suction hose sub assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  8. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A005K6E

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with pulley.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  9. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. Disconnect the connector.

    2. A005LXT

      Remove the 4 bolts and the compressor assembly with pulley.