COMPRESSOR(for 1ND-TV) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  4. REMOVE FRONT BUMPER COVER

    Click here

  5. REMOVE FAN AND GENERATOR V BELT

    Click here

  6. DISCONNECT SUCTION HOSE

    A005H80

    1. Remove the bolt and disconnect the suction hose from the compressor assembly with pulley.

    2. Remove the O-ring from the suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  7. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

    A005JTB

    1. Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with pulley.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  8. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

    A005GTP

    1. Disconnect the connector.

    2. Remove the 2 bolts and the 2 nuts.

    3. A005MJM

      Using a "TORX" socket wrench (E8), remove the 2 stud bolts and the compressor assembly with pulley.