COOLER EXPANSION VALVE INSTALLATION

PROCEDURE

1. INSTALL COOLER EXPANSION VALVE

   
   

   1. Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.

      Compressor oil
      ND-OIL8 or equivalent

   2. Install the 2 new O-rings onto the No. 1 cooler evaporator sub-assembly.

   3. Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.

      Torque:

      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

2. INSTALL LIQUID TUBE SUB-ASSEMBLY

   Click here

3. INSTALL SUCTION TUBE SUB-ASSEMBLY

   Click here

4. INSTALL OUTER COWL TOP PANEL

   Click here

5. INSTALL INNER COWL TOP TO COWL BRACE

   Click here

6. INSTALL INNER COWL TOP REINFORCEMENT

   Click here

7. INSTALL INSIDE COWL TOP CORNER PANEL LH

   Click here

8. INSTALL FRONT AIR SHUTTER SEAL RH

   Click here

9. INSTALL FRONT NO. 1 VENTILATOR SEAL

   Click here

10. INSTALL WINDSHIELD WIPER LINK ASSEMBLY

    Click here

11. CHARGE REFRIGERANT

    Click here

12. WARM UP ENGINE

    Click here

13. INSPECT FOR REFRIGERANT LEAK

    Click here