PTC HEATER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL QUICK HEATER ASSEMBLY

   

   
   

   1. Install the quick heater assembly with the 2 screws.

   2. Connect the connector and 2 clamps.

2. INSTALL NO. 1 AIR DUCT

   
   

   1. Engage the 3 claws and install the No. 1 air duct.

3. INSTALL BLOWER ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

5. INSPECT SRS WARNING LIGHT

   Click here