PTC HEATER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT QUICK HEATER ASSEMBLY


    1. A005GHSE08
      Text in Illustration
      *a

      Component without harness connected

      (Quick Heater Assembly)
      *b

      Component without terminal connected

      (Ground Terminal (for Quick Heater Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - Ground terminal Always Below 1 Ω
      2 - Ground terminal Always Below 1 Ω
      3 - Ground terminal Always Below 1 Ω

      If the result is not as specified, replace the quick heater assembly.