AIR INLET CONTROL SERVO MOTOR REMOVAL

PROCEDURE


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

  2. REMOVE BLOWER UNIT (for RHD)

    Click here

  3. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for RHD)


    1. A005MGX

      Remove the 2 screws and remove the No. 1 blower damper servo sub-assembly.

  4. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for LHD)


    1. A005LXE

      Disconnect the connector.

    2. Remove the 2 screws and remove the No. 1 blower damper servo sub-assembly.