CONDENSER(for 1NR-FE) INSTALLATION

PROCEDURE

1. INSTALL COOLER CONDENSER ASSEMBLY

   
   

   1. Engage the 2 claws, 2 guides and install the cooler condenser assembly into the vehicle.

      Note

      Do not damage the cooler condenser assembly or radiator assembly when installing the condenser assembly.

      Tech Tips

      If a new cooler condenser assembly is installed, add compressor oil to the condenser assembly as follows.

      Capacity
      Add 40 cc (1.35 fl. oz.)

      Compressor oil
      ND-OIL8 or equivalent.

2. INSTALL LIQUID TUBE SUB-ASSEMBLY

   
   

   1. Remove the attached vinyl tape from the tube and the connecting part of the cooler condenser assembly.

   2. Apply sufficient compressor oil to a new O-ring and the fitting surface of the tube joint.

      Compressor oil
      ND-OIL8 or equivalent

   3. Install the O-ring onto the liquid tube sub-assembly.

   4. Install the liquid tube onto the cooler condenser assembly with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

3. INSTALL NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

   
   

   1. Remove the attached vinyl tape from the hose and the connecting part of the cooler condenser assembly.

   2. Apply sufficient compressor oil to a new O-ring and the fitting surface of the hose joint.

      Compressor oil
      ND-OIL8 or equivalent

   3. Install the O-ring onto the No. 1 cooler refrigerant discharge hose.

   4. Install the No. 1 cooler refrigerant discharge hose onto the cooler condenser assembly with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

4. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

   Click here

5. INSTALL HOOD LOCK ASSEMBLY

   Click here

6. INSTALL AIRBAG SENSOR BRACKET

   Click here

7. INSTALL NO. 1 COOLER COVER

   Click here

8. INSTALL HEADLIGHT ASSEMBLY

   Click here

9. INSTALL FRONT BUMPER COVER

   Click here

10. INSPECT HOOD

    Click here

11. ADJUST HOOD

    Click here

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:

    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

13. CHARGE REFRIGERANT

    Click here

14. WARM UP ENGINE

15. INSPECT FOR REFRIGERANT LEAK

    Click here

16. INSPECT SRS WARNING LIGHT

    Click here