CONDENSER(for 1NZ-FE) REASSEMBLY

PROCEDURE

1. INSTALL COOLER DRYER

   
   

   1. 

      Text in Illustration

      *1

      Modulator

      Using needle nose pliers, install the cooler dryer onto the modulator.

   2. 

      Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.

      Compressor oil
      ND-OIL 8 or equivalent

   3. 

      Text in Illustration

      *1	14 mm Straight Hexagon Wrench
      *2	Modulator

      Using a 14 mm straight hexagon wrench, install the cap into the modulator.

      Torque:

      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }