FRONT SEAT INNER BELT ASSEMBLY(for Front Passenger Side) INSTALLATION

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (w/o Seat Heater System)


    1. A005IPEE04
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not place the front seat inner belt over the protruding part of the front seat frame adjuster.

    2. Install the wire harness into the claw of the front seat cushion shield.

    3. A005K9X

      Install the 4 clamps.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (w/ Seat Heater System)


    1. A005IPEE04
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not place the front seat inner belt over the protruding part of the front seat frame adjuster.

    2. Install the wire harness into the claw of the front seat cushion shield.

    3. A005KHK

      Install the 4 clamps.

    4. Connect the seat heater connector.

  3. INSTALL FRONT SEAT ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSPECT SRS WARNING LIGHT

    Click here