FRONT SEAT INNER BELT ASSEMBLY(for Front Passenger Side) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A005IPNE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Front Passenger Side))

      Check the front seat inner belt assembly.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 3 Tongue plate fastened and seat occupied 10 kΩ or higher
        Tongue plate released and seat occupied Below 1 Ω

        If the result is not as specified, replace the inner belt assembly (for Front Passenger Side).