FRONT SEAT INNER BELT ASSEMBLY(for Driver Side) INSTALLATION

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (w/o Seat Heater System)

    A005GRKE01

    1. Install the front seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not place the front seat inner belt over the protruding part of the front seat frame adjuster.

      Text in Illustration
      *1 Protruding Part

    2. Install the wire harness into the claw of the front seat cushion shield.

    3. A005GF2

      Install the 4 clamps.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (w/ Seat Heater System)

    A005GRKE01

    1. Install the front seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not place the front seat inner belt over the protruding part of the front seat frame adjuster.

      Text in Illustration
      *1 Protruding Part

    2. Install the wire harness into the claw of the front seat cushion shield.

    3. A005GYV

      Install the 5 clamps.

    4. Connect the seat heater connector.

  3. INSTALL FRONT SEAT ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  5. INSPECT SRS WARNING LIGHT

    Click here