FRONT SEAT INNER BELT ASSEMBLY(for Driver Side) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. A005IPNE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Driver Side))

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 3 Tongue plate fastened 10 kΩ or higher
        Tongue plate released Below 1 Ω

        If the result is not as specified, replace the front seat inner belt assembly (for Driver Side).