OCCUPANT DETECTION SENSOR INSPECTION

PROCEDURE


  1. INSPECT OCCUPANT DETECTION SENSOR


    1. A005IPNE01
      Text in Illustration
      *a

      Component without harness connected

      (Occupant Detection Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Front passenger side seat occupied and seat belt unfastened Below 100 Ω
      Front passenger side seat not occupied and seat belt unfastened 1 MΩ or higher

      If the result is not as specified, replace the occupant detection sensor.