CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH side and LH side.
The procedure listed below is for the LH side.
PROCEDURE
INSTALL REAR SEAT ASSEMBLY LH
Insert the 2 location pins through the 2 body holes and temporarily install the rear seat assembly LH with the 4 bolts.
Tighten the 4 bolts in the order shown in the illustration.
| *1 | Location Pin |
| *a | Front Side |
| *b | Rear Side |
Pull down the rear seat cushion assembly LH.
Temporarily install the 3 bolts.
Tighten the 3 bolts in the order shown in the illustration.
Engage the seat belt holder hook.
INSTALL NO. 2 SEAT NO. 2 LEG COVER
Engage the 3 claws and guide, install the No. 2 seat No. 2 leg cover.
INSTALL NO. 2 SEAT LEG COVER (for LH Side)
Engage the 4 claws and 2 guide, install the No. 2 rear seat leg cover.
INSTALL REAR SEAT ASSEMBLY RH
Insert the 2 location pins through the 2 body holes and temporarily install the rear seat assembly RH with the 4 bolts.
Tighten the 4 bolts in the order shown in the illustration.
| *1 | Location Pin |
| *a | Front Side |
| *b | Rear Side |
Connect the connector (for 3 Point Type Rear Center Seat Belt).
Pass the rear seat lap type belt assembly RH through the rubber band.
Pull down the rear seat cushion assembly RH.
Temporarily install the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
INSTALL NO. 2 SEAT LEG COVER (for RH Side)
Tech Tips
Use the same procedure for the No. 1 rear seat leg cover (for LH Side).
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
INSTALL RECLINING REMOTE CONTROL BEZEL LH
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
INSTALL DECK SIDE TRIM BOX LH (w/o Rear Deck Floor Box)
INSTALL LUGGAGE ROOM BOX SEPARATOR
INSTALL REAR FLOOR REAR MAT (w/o Rear Deck Floor Box)
INSTALL REAR DECK TRIM COVER
INSTALL BACK DOOR WEATHERSTRIP
INSTALL REAR DECK FLOOR BOX (w/ Rear Deck Floor Box)
INSTALL DECK BOARD ASSEMBLY
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL REAR DOOR SCUFF PLATE LH