REAR SEAT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  3. REMOVE DECK BOARD ASSEMBLY

    Click here

  4. REMOVE REAR DECK FLOOR BOX (w/ Rear Deck Floor Box)

    Click here

  5. REMOVE BACK DOOR WEATHERSTRIP

    Click here

  6. REMOVE REAR DECK TRIM COVER

    Click here

  7. REMOVE REAR FLOOR REAR MAT (w/o Rear Deck Floor Box)

    Click here

  8. REMOVE LUGGAGE ROOM BOX SEPARATOR

    Click here

  9. REMOVE DECK SIDE TRIM BOX LH (w/o Rear Deck Floor Box)

    Click here

  10. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  11. REMOVE RECLINING REMOTE CONTROL BEZEL LH

    Click here

  12. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  13. REMOVE NO. 2 SEAT LEG COVER (for LH Side)


    1. A005J8C

      Disengage the 4 claws, 2 guides and remove the No. 2 seat leg cover.

  14. REMOVE NO. 2 SEAT NO. 2 LEG COVER


    1. A005HT3

      Disengage the 3 claws, guides and remove the No. 2 seat No. 2 leg cover.

  15. REMOVE REAR SEAT ASSEMBLY LH


    1. A005HFLE01
      Text in Illustration
      *1 Seat Belt Holder Hook
      *2 Seat Belt Holder

      Disengage the seat belt holder hook.

    2. A005LVR

      Remove the 3 bolts and pull up the rear seat cushion assembly LH.

    3. A005JMAE02

      Remove the 4 bolts.

    4. Detach the 2 location pins through the 2 body holes and remove the rear seat assembly LH.

      Text in Illustration
      *1 Location Pin
      *a Front Side
      *b Rear Side

  16. REMOVE NO. 2 SEAT LEG COVER (for RH Side)

    Tech Tips

    Use the same procedure for the No . 1 rear seat leg cover (for LH Side).

  17. REMOVE REAR SEAT ASSEMBLY RH


    1. A005LV0

      Remove the 2 bolts and pull up the rear seat cushion assembly RH.

    2. A005KPDE01
      Text in Illustration
      *1 Rear Seat Lap Type Belt Assembly RH
      *2 Rubber Band

      Pass the rear seat lap type belt assembly RH through the rubber band.

    3. A005H39E02

      Disconnect the connector (for 3 Point Type Rear Center Seat Belt).

    4. Remove the 4 bolts.

    5. Detach the 2 location pins through the 2 body holes and remove the rear seat assembly RH.

      Text in Illustration
      *1 Location Pin
      *a Front Side
      *b Rear Side