CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
REMOVE SEAT ADJUSTER COVER CAP
Remove the 2 seat adjuster cover caps.
REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side and w/o Seat Heater System)
REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side and w/ Seat Heater System)
REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side and w/o Seat Heater System)
REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side and w/ Seat Heater System)
REMOVE FRONT SEAT UNDER TRAY (for Front Passenger Side and w/ Under Tray)
Remove the front seat under tray.
REMOVE FRONT SEAT UNDER TRAY RAIL SUB-ASSEMBLY (for Front Passenger Side and w/ Under Tray)
Remove the 4 screws and the front seat under tray rail sub-assembly.
REMOVE SEAT ARMREST COVER (for Driver Side and w/ Armrest)
Disengage the 2 claws and remove the seat armrest cover.
REMOVE FRONT SEAT ARMREST ASSEMBLY (for Driver Side and w/ Armrest)
| *1 | Wave washer |
| *2 | Plate Washer |
Remove the bolt and the front seat armrest assembly.
REMOVE RECLINING ADJUSTER RELEASE HANDLE
| *1 | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the guide and remove the reclining adjuster release handle.
REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)
Remove the screw.
Disengage the guide and remove the vertical adjusting handle.
REMOVE FRONT SEAT CUSHION SHIELD
Remove the screw.
Disengage the clip and 2 claws.
Disengage the guide and remove the front seat cushion shield.
REMOVE FRONT SEAT INNER CUSHION SHIELD
Disengage the claw and 2 guides, remove the front seat inner cushion shield.
REMOVE SEPARATE TYPE FRONT SEAT BACK ASSEMBLY (w/ Front Seat Side Airbag)
| *1 | Rubber Band |
Disengage the rubber band.
Disengage the claw and detach the connector.
Disengage the 6 clamps.
| *1 | Wire Harness Band |
Detach the wire harness band.
Disengage the 2 hooks.
Remove the 4 bolts and the separate type front seat back assembly.
REMOVE FRONT SEAT HEADREST SUPPORT
| *1 | Rubber Band |
Disengage the rubber band.
Remove the 3 hog rings and roll up the front seat back cover.
| *1 | Fasten Rubber |
Remove the 3 hog rings and detach the fasten rubber. (for Leather Seat)
Disengage the 4 claws and remove the 2 front seat headrest supports.
REMOVE FRONT SEAT BACK COVER WITH PAD
Remove the front seat back cover with pad from the separate type front seat back spring assembly.
REMOVE SEPARATE TYPE FRONT SEAT BACK COVER (for Leather Seat)
Remove the 6 hog rings and separate type front seat back cover from the separate type front seat back pad.
REMOVE FRONT SEAT CUSHION COVER WITH PAD
Disengage the 2 hooks.
Disengage the 9 hooks and remove the front seat cushion cover with pad from the front seat cushion spring assembly.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for Leather Seat)
Remove the 16 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.
REMOVE FRONT SEAT LOWER CUSHION SHIELD (for Driver Side)
Disengage the 2 claws and remove the front seat lower cushion shield.
REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)
Remove the screw.
Disengage the clip and remove the front seat lower cushion shield LH.
REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)
Remove the screw.
Disengage the clip and remove the front seat lower cushion shield RH.
REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH
Remove the screw and front seat cushion edge protector LH.
REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH
Remove the screw and front seat cushion edge protector RH.
REMOVE SEPARATE TYPE FRONT SEAT BACK SPRING ASSEMBLY
Remove the 4 bolts and separate type front seat back spring assembly from the separate type front seat cushion spring assembly.