AIRBAG CUT-OFF INDICATOR LIGHT REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

    Click here

  4. REMOVE LOWER INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

  5. REMOVE TELLTALE LIGHT ASSEMBLY

    A005HHLE02
    Text in Illustration
    *1 Protective Tape
    *2 Telltale Light Assembly

    1. Using a thin-bladed screwdriver with its tip wrapped with protective tape, disengage the 4 claws and remove the telltale light assembly.