AIRBAG CUT-OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT AIRBAG CUT-OFF SWITCH

    A005HZ4E05
    Text in Illustration
    *a

    Component without harness connected

    (Airbag Cut Off Switch)

    1. Check the resistance.


      1. Using an ohmmeter, measure the resistance between the terminal.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 (PMC-) - 2 (PMC+) OFF 90 to 110 Ω
        ON 360 to 440 Ω

        If the result is not as specified, replace the airbag cut-off switch.