AIRBAG CUT-OFF SWITCH REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  4. REMOVE AIRBAG CUT-OFF SWITCH

    A005JRL

    1. Remove the airbag cut-off switch while holding the 2 claws.

    2. A005LKO

      Disconnect the airbag cut-off switch connector.