COMBINATION METER REMOVAL

PROCEDURE

1. REMOVE NO. 1 METER HOOD CLUSTER

   Click here

2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   

   Text in Illustration

   *1	Protective Tape

   
   

   1. Apply protective tape, as shown in the illustration.

   2. 

      Text in Illustration

      *1	Moulding Remover

      Using a moulding remover, disengage the 7 clips and the guide to remove the instrument cluster finish panel assembly in the direction indicated by the arrow as shown in the illustration.

3. REMOVE COMBINATION METER ASSEMBLY

   

   
   

   1. Remove the 2 screws.

   2. Disengage the 2 clips.

   3. 

      Disconnect the 2 connectors and remove the combination meter assembly.