METER / GAUGE SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Combination Meter / DTC.

    5. Check DTCs and then write them down.

      Tech Tips

      Refer to the intelligent tester operator's manual for further details.

    6. Confirm the details of the DTCs.

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON (do not start the engine).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Combination Meter / DTC / Clear.

      Tech Tips

      Refer to the intelligent tester operator's manual for further details.

    5. Clear DTCs by pressing the YES button on the tester.

      Tech Tips

      Refer to the intelligent tester operator's manual for further details.