METER / GAUGE SYSTEM SYSTEM DESCRIPTION


  1. METER GAUGE AND WARNING INDICATOR

    Meter/Gauge
    Item Signal Description
    Speedometer Indicates vehicle speed based on signals received from the brake actuator assembly (CAN).
    Tachometer Indicates engine speed based on signals from the ECM (CAN).
    Fuel Gauge Indicates fuel level in accordance with signals received from the fuel sender gauge (Direct line).
    ODO/TRIP meter Calculates accumulated total vehicle travel distance and vehicle travel distance since mode switch pressed.
    Warning/Indicator
    Item Signal Description
    TURN Receives turn signal from the headlight dimmer switch assembly (Direct line).
    BEAM Receives high beam signal from the DIM relay (Direct line).
    TAIL*11 Receives taillight signal from the TAIL relay (Direct line).
    REAR FOG*1 Receives rear fog light signal from the FOG RR relay (Direct line).
    FRONT FOG*2

    except 1NZ-FE:

    Receives front fog light signal from the FR FOG relay (Direct line).

    for 1NZ-FE:

    Receives front fog light signal from the FOG FR relay (Direct line).
    BRAKE

    • Receives brake fluid level warning signal from the brake level switch (Direct line).

    • Receives parking brake switch signal from the main body ECU (multiplex network body ECU) (CAN).

    • Receives malfunction signal from the brake actuator assembly (skid control ECU) (CAN).
    ABS Receives malfunction signal from the brake actuator assembly (skid control ECU) (CAN).
    OIL PRESSURE

    except 1ND-TV:

    Receives engine oil pressure warning signal from the engine oil pressure switch (Direct line).

    for 1ND-TV:

    Receives engine oil pressure warning signal from the ECM (CAN).

    w/ Stop and Start System:

    Receives engine oil pressure warning signal from the oil pressure switch (Direct line) and engine stop and start ECU (CAN).
    MIL Receives malfunction check engine warning signal from the ECM (Direct line).
    D,P BELT

    • Receives driver seat belt warning signal (unfastened) from the main body ECU (multiplex network body ECU) (CAN).

    • Receives front passenger seat belt warning signal (unfastened) from the front passenger seat inner assembly (Direct line).
    AIRBAG Receives malfunction signal from the center airbag sensor assembly (CAN).
    Engine coolant temperature HOT Receives engine coolant temperature warning signal from the ECM (CAN).
    Engine coolant temperature COOL Receives engine coolant temperature indicator signal from the ECM (CAN).
    CHARGE

    for 1NZ-FE:

    Receives malfunction signal from the generator (Direct line).

    except 1NZ-FE:

    Receives malfunction signal from the generator (CAN).
    DOOR Open door indicator illuminates when receiving signal from the main body ECU (multiplex network body ECU) (CAN).
    EPS Receives malfunction signal from the power steering ECU (CAN).
    CVT SPORT*9 Receives CVT sport indicator signal from the ECM (CAN).
    VSC OFF*3 Receives VSC control off signal from the brake actuator assembly (skid control ECU) (CAN).
    SLIP*3 Receives malfunction signal from the brake actuator assembly (skid control ECU) (CAN).
    ENTRY KEY*4 Receives signal from the certification ECU (smart key ECU assembly) (CAN).
    GLOW*5 Receives the glow signal from the ECM (CAN).
    SEDIMENT*5 Receives sediment signal from the level warning switch (Direct line).
    OIL LEVEL*5 Receives the engine oil level signal from the engine oil level sensor (Direct line).
    OIL MAINTENANCE*5 Receives oil maintenance signal from the ECM (CAN).
    DPF WARNING*5 Receives DPF status signal from the ECM (CAN).
    ECO*6 Receives ecology light indicator signal from the ECM (CAN) and illuminates when the vehicle is being driven ECO-friendly.
    Gear Shift Indicator (Shift UP/DOWN)*7 Receives shift up/down signal from the ECM (CAN).
    Stop and start cancel*8 Receives ECO RUN OFF indicator light signal from the engine stop and start ECU (CAN).
    Stop and start*8 Receives ECO RUN indicator light signal from the engine stop and start ECU (CAN).
    P shift position indicator*9 Receives a P signal from the ECM (CAN).
    R shift position indicator*9, *10

    Receives an R signal from the ECM (CAN).*9

    Receives an R signal from the TCM (Direct line).*10
    N shift position indicator*9, *10

    Receives an N signal from the ECM (CAN).*9

    Receives an N signal from the TCM (Direct line).*10
    D shift position indicator*9

    Receives a D signal from the ECM (CAN).

    During oil level confirmation mode, receives an A/T oil temperature signal and indicates the A/T oil temperature by turning off / blinking / turning on the shift position D indicator.
    MMT warning*10 Receives malfunction check MMT warning signal from the ECM (Direct line).
    S/D switch indicator*9 Receives an S/D switch signal from the ECM (CAN).
    B shift position indicator*9 Receives a B signal from the ECM (CAN).
    Transaxle range indicator (1 to 5)*9 Receives a signal (1 to 5) from the ECM (CAN).
    Transaxle range indicator (1 to 6)*10 Receives a signal (1 to 6) from the TCM (Direct line).
    Mode indicator*9, *10

    Receives a mode signal from the ECM (CAN).*9

    Receives a mode signal from the TCM (Direct line).*10
    TRC OFF*3 Receives TRC OFF signal from the brake actuator assembly (skid control ECU) (CAN).
    Leveling*12 Receives malfunction check headlight leveling warning signal from the headlight leveling ECU (Direct line).
    Cruise*13 Receives cruise signal from the ECM (CAN).
    Set*13 Receives cruise set signal from the ECM (CAN).

    • *1: w/ Rear Fog Light

    • *2: w/ Front Fog Light

    • *3: w/ VSC

    • *4: w/ Entry and Start System

    • *5: for 1ND-TV

    • *6: w/ ECO Driving Indicator

    • *7: for Manual Transaxle

    • *8: w/ Stop and Start System

    • *9: for CVT

    • *10: for Multi-mode Manual Transaxle

    • *11: w/ Daytime Running Light System

    • *12: w/ HID Headlight

    • *13: w/ Cruise Control System

    Buzzer
    Item Signal Description
    LIGHT Reminder Buzzer ON: When ignition switch is off, light control switch is in TAIL position, and driver side door is open.
    KEY Reminder*1 Buzzer ON: Ignition switch is off, key is inserted, and driver side door is open.
    Seat Belt Warning (driver and passenger seat belt) Buzzer ON: When ignition switch is ON, driver or passenger seat belt is unfastened, and vehicle speed is 20 km/h (12.4 mph) or more.
    Seat Belt Warning (rear seat belt)*2 Buzzer ON: When ignition switch is ON, rear seat belt is unfastened, and vehicle speed is 20 km/h (12.4 mph) or more.
    ENTRY KEY Warning*3 Buzzer ON: Receives signal from the certification ECU (smart key ECU assembly).
    PKB Reminder Buzzer ON: When ignition switch is ON, parking brake is operating, and vehicle speed is 5 km/h (3.1 mph) or more.
    Immobiliser*3 Buzzer ON: Receives signal from the certification ECU (smart key ECU assembly).
    ECO RUN*4 Buzzer ON: Receives signal from the engine stop and start ECU.
    Sports shift reject Buzzer ON: Receives signal from the ECM.
    EPS buzzer Buzzer ON: Receives signal from the power steering ECU assembly.
    MMT warning*5

    Sounds if the following conditions are met simultaneously.


    • Engine is running

    • Shift lever is in E, M or R

    • Driver's door is open

    • Vehicle is stopped

    Sounds during system warning.

    While performing the initialization and learning or the clamp position adjustment without using the intelligent tester, the buzzer sounds to indicate the ECU mode change.
    MMT shift reject*5
    MMT shift reverse*5 Buzzer ON when ignition switch is ON and shift position reverse.
    Warning of driving with door open Buzzer ON: When ignition switch is off, each door courtesy light switch is ON.
    A/T Reverse*6 Buzzer ON when ignition switch is ON and shift position reverse.

    • *1: w/o Entry and Start System

    • *2: w/ Rear Seat Belt Warning System

    • *3: w/ Entry and Start System

    • *4: w/ Stop and Start System

    • *5: for Multi-mode Manual Transaxle

    • *6: w/o Rear Fog Light

    Cruise Information Display
    Item Signal Description
    Cruise information

    • Instantaneous fuel consumption

    • Average fuel consumption since refueling

    • ECO time odo*

    • Driving time

    • Possible running distance

    		 The display can be switched using the MODE switch located on the lower left of the combination meter.

    • *: w/ Stop and Start System

  2. LED CHECK


    1. Check the indicator/warning light operation according to the condition(s) in the table below.

      Indicator/Warning Light Specification
      BRAKE, ABS, VSC OFF*5, SLIP*5, TRC OFF*5, TEMP HOT, OIL LEVEL*1, OIL MAINTENANCE*1, DPF*1, ECO*2, ECO RUN*3, ECO RUN OFF*3, SEDIMENTER*1 Indicator/Warning light comes on for about 3 seconds after turning the ignition switch to ON.
      AIRBAG Warning light comes on for about 6 seconds after turning the ignition switch to ON.
      OIL PRESSURE, CHECK ENGINE, CHARGE, EPS, SHIFT UP/DOWN*4 Indicator/Warning light comes on after turning the ignition switch to ON and the indicator light goes off after the engine starts.

      • *1: for 1ND-TV

      • *2: w/ ECO Driving Indicator

      • *3: w/ Stop and Start System

      • *4: for Manual Transaxle

      • *5: w/ VSC