FRONT DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

    A005IV7E02
    Text in Illustration
    *1 Switch Body
    *a

    Component without harness connected

    (Front Door Courtesy Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - Switch body Not pushed Below 1 Ω
      1 - Switch body Pushed 10 kΩ or higher

      If the result is not as specified, replace the front door courtesy switch assembly.