FOOTWELL LIGHT(for LH Side) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. A005M7OE08
      Text in Illustration
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly LH)

      Apply battery voltage to the connector and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      		 LED illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly LH.