LUGGAGE COMPARTMENT ROOM LIGHT INSPECTION

PROCEDURE


  1. INSPECT NO. 2 ROOM LIGHT ASSEMBLY

    A005GL1E01
    Text in Illustration
    *a

    Component without harness connected

    (No. 2 Room Light Assembly)

    1. Apply battery voltage to the terminals and check that the light comes on.

      OK:
      Measurement Condition Specified Condition

      Battery positive (+) - Terminal 1

      Battery negative (-) - Terminal 2

      		 Comes on

      If the result is not as specified, replace the No. 2 room light assembly.