LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Ignition switch ACC signal / ON or OFF

      ON: Ignition switch ACC or ON

      OFF: Ignition switch off

      		 -
      IG SW Ignition switch ON signal / ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch ACC or off

      		 -
      Parking Brake SW Parking brake switch signal / ON or OFF

      ON: Parking brake applied

      OFF: Parking brake released

      		 -
      RL Door Courtesy SW*3 Rear door courtesy light switch LH signal / ON or OFF

      ON: Rear door opened

      OFF: Rear door closed

      		 -
      RL Door Courtesy SW*4 Rear door courtesy light switch LH signal / ON or OFF

      ON: Rear door LH opened

      OFF: Rear door LH closed

      		 -
      RR Door Courtesy SW*3 Rear door courtesy light switch RH signal / ON or OFF

      ON: Rear door opened

      OFF: Rear door closed

      		 -
      RR Door Courtesy SW*4 Rear door courtesy light switch RH signal / ON or OFF

      ON: Rear door RH opened

      OFF: Rear door RH closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch signal / ON or OFF

      ON: Back door opened

      OFF: Back door closed

      		 -
      FR Door Lock Pos Front door unlock detection switch RH signal / Unlock or Lock

      Unlock: Front door RH unlocked

      Lock: Front door RH locked

      		 -
      FR Door Courtesy Front door courtesy light switch RH signal / ON or OFF

      ON: Front door RH closed

      OFF: Front door RH opened

      		 -
      FL Door Lock Pos Front door unlock detection switch LH signal / Unlock or Lock

      Unlock: Front door LH unlocked

      Lock: Front door LH locked

      		 -
      FL Door Courtesy Front door courtesy light switch LH signal / ON or OFF

      ON: Front door LH closed

      OFF: Front door LH opened

      		 -
      RR-Door Lock Pos SW Rear door unlock detection switch RH signal / ON or OFF

      ON: Rear door unlocked

      OFF: Rear door locked

      		 -
      RL-Door Lock Pos SW Rear door unlock detection switch LH signal / ON or OFF

      ON: Rear door unlocked

      OFF: Rear door locked

      		 -
      I/L ON W/Door Key Unlock Function which turns on room lights when door is unlocked / ON or OFF Customized setting displayed -
      Lighting Time Lighting time after closing all doors / 7.5s or 15s or 30s Customized setting displayed -
      Room Light when Aprchd Function which turns on room lights when key brought within vehicle exterior detection area / ON or OFF Customized setting displayed -
      Inside Foot Light Function which controls footwell lights / ON or OFF Customized setting displayed -
      I/L when ACC OFF Function which turns on lights when ignition switch is turned from ON or ACC to off / ON or OFF Customized setting displayed -
      Light Control Function which illuminates the footwell lights when the ignition switch is on and the shift lever is not in P*1 or parking brake released*2. Customized setting displayed -

      • *1: for CVT

      • *2: except CVT

      • *3: w/ Rear Fog Light

      • *4: w/o Rear Fog Light

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System

      • No. 1 room light assembly

      • Engine switch*1

      • Map light assembly*2

      		 ON/OFF No. 1 room light and map light switches at DOOR position and all doors closed.
      Fr Foot Light*3 No. 1 interior illumination light assembly ON/OFF Ignition switch off
      Interior Panel Relay*4 Panel relay (Instrument panel junction block assembly) ON/OFF Ignition switch is off and light control switch in tail position.

      • *1: w/ Entry and Start System

      • *2: w/ Glass Roof

      • *3: w/ Footwell Light

      • *4: w/ Daytime Running Light System