LIGHTING SYSTEM CUSTOMIZE PARAMETERS

CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

Tech Tips

The following items can be customized.

Note

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.

Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Utility / Customize.

Select the setting by referring to the table below.

Illuminated Entry
Display	Default	Content	Setting	Relevant ECU
Lighting Time1, 5	15s	A function that changes the duration that the lights remain on after closing the doors (the lights quickly fade out when the ignition switch is turned to ACC or ON).	7.5s/15s/30s	Main body ECU (Multiplex network body ECU)
I/L when ACC OFF1, 5	ON	A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the lights turn on when the room light switch are set to DOOR).	ON/OFF
I/L ON W/Door Key Unlock1. 5	ON	A function that turns on the lights when the door is unlocked (the lights turn on when the room light switch are set to DOOR).	ON/OFF
Room Light when Aprchd*2	ON	A function that turns on the lights when the key is brought within the vehicle exterior detection area (the lights turn on when each room light switch is set to DOOR).	ON/OFF
Light Control*5	ON	A function that illuminates the footwell lights under the following conditions: ignition switch ON, shift lever not in P and all doors closed.3 A function that illuminates the footwell lights under the following conditions: ignition switch ON, parking brake released and all doors closed.4	ON/OFF
Inside Foot Light*5	ON	A function that disables the footwell lights at all times.	ON/OFF

*1: w/o Rear Fog Light and w/ Automatic Light Control System
*2: w/ Entry and Start System
*3: for CVT
*4: except CVT
*5: w/ Footwell Light