ELECTRICAL KEY OSCILLATOR(for Front Floor) INSTALLATION

PROCEDURE

1. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Pedal Type Parking Brake)

   
   

   1. Install the No. 1 indoor electrical key antenna assembly with the bolt.

      Torque:

      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

   2. Connect the connector.

2. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Lever Type Parking Brake)

   
   

   1. Engage the clamp to install the No. 1 indoor electrical key antenna assembly.

   2. Connect the connector.

3. INSTALL CONSOLE BOX ASSEMBLY

   Click here