THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. According to the display on the tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Key Unlock Warning SW*1 Unlock warning switch signal / ON or OFF

      ON: Key is in ignition key cylinder

      OFF: No key is in ignition key cylinder

      		 -
      ACC SW Ignition switch status / ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      		 -
      IG SW Ignition switch status / ON or OFF

      ON: Ignition switch to ON

      OFF: Ignition switch off

      		 -
      RR Door Courtesy SW Rear RH door courtesy light switch signal / ON or OFF

      ON: Rear RH door open

      OFF: Rear RH door closed

      		 -
      RL Door Courtesy SW Front RH door courtesy light switch signal / ON or OFF

      ON: Rear LH door open

      OFF: Rear LH door closed

      		 -
      FR Door Lock Pos Front RH door lock position switch signal / ON or OFF

      ON: Front RH door unlocked

      OFF: Front RH locked

      		 -
      FR Door Courtesy Front RH door courtesy light switch signal / ON or OFF

      ON: Front RH door closed

      OFF: Front RH door open

      		 -
      FL Door Lock Pos Front LH door lock position switch signal / ON or OFF

      ON: Front LH door unlocked

      OFF: Front LH door locked

      		 -
      FL Door Courtesy Front LH door courtesy light switch signal / ON or OFF

      ON: Front LH door closed

      OFF: Front LH door open

      		 -
      Hood Courtesy Switch Engine hood courtesy signal / ON or OFF

      ON: Engine hood open

      OFF: Engine hood closed

      		 -
      RR-Door Lock Pos SW Rear RH door lock position switch signal / ON or OFF

      ON: Rear RH door unlocked

      OFF: Rear RH side door locked

      		 -
      RL-Door Lock Pos SW Rear LH door lock position switch signal / ON or OFF

      ON: Rear LH door unlocked

      OFF: Rear LH side door locked
      Back Door Courtesy SW Back door courtesy switch / ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -

      • *1: w/o Entry and Start System

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the tester, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Security Indicator*1 Security indicator light ON/OFF -
      Vehicle Horn Vehicle horns ON/OFF -
      Security Horn Security horn ON/OFF -

      *1: w/ Entry and Start System

      Immobiliser
      Tester Display Test Part Control Range Diagnostic Note
      Security Indicator*2 Security indicator light ON/OFF -

      *2: w/o Entry and Start System