| DTC Code | Detection Item | Detection Enabling Condition (DTC Output Confirmation Operation) | See page |
|---|---|---|---|
| B2784 | Antenna Coil Open / Short | With the shift lever in P* the electrical key transmitter is held against the engine switch and an engine start operation is performed by pressing and holding the engine switch when the transmitter battery is depleted. | |
| B278A | Short to GND in Immobiliser System Power Source Circuit | With the shift lever in P* the electrical key transmitter is held against the engine switch and an engine start operation is performed by pressing and holding the engine switch when the transmitter battery is depleted. | |
| B2790 | ID BOX EEPROM Malfunction | An immobiliser set/unset operation is performed (Turn the engine switch off or on (IG) while carrying the electrical key transmitter). |
*: for CVT
| DTC Code | Detection Item | Detection Enabling Condition (DTC Output Confirmation Operation) | See page |
|---|---|---|---|
| B2799 | Engine Immobiliser System Malfunction | Either condition is met: - Within 10 seconds of an engine start operation being performed (with the shift lever in P and the brake pedal*1 or clutch pedal*2 depressed, press the engine switch while carrying the electrical key transmitter). If thereis a malfunction, the engine stops (communication begins within 3 seconds of the engine start operation being performed, and DTCs are stored after 6 seconds). - 10 seconds after the engine switch is turned on (IG) after reconnecting the cable to the negative (-) battery terminal (communication begins within 3 seconds of the engine switch being turned on (IG), and DTCs are stored after 6 seconds). |
|
| B279A | Theft Deterrent System Communication Line High Fixation | Turn the engine switch on (IG) and wait 6 seconds. | |
| B279C | Theft Deterrent System Presence Detection | Check for DTCs. |
*1: for CVT
*2: for Manual Transaxle