BACK DOOR LOCK INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR LOCK ASSEMBLY

    A005I73E05
    Text in Illustration
    *1 latch
    *a

    Component without harness connected

    (Back Door Lock Assembly)
    *b Lock
    *c Unlock

    1. Check the operation of the back door lock motor.


      1. Apply the battery voltage and check the operation of the back door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (ACT+)

        Battery negative (-) → 2 (ACT-)

        		 Locked → Unlocked

        • If the result is not as specified, replace the back door lock assembly.

    2. A005I73E06
      Text in Illustration
      *1 Latch
      *a

      Component without harness connected

      (Back Door Lock Assembly)
      *b Lock
      *c Unlock

      Check operation of the back door courtesy switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (ACT-) - 3 (D+) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not specified, replace the back door lock assembly.