REAR DOOR LOCK REMOVAL

PROCEDURE


  1. REMOVE REAR DOOR ARMREST UPPER BASE PANEL

    Click here

  2. REMOVE REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

    Click here

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  4. REMOVE REAR DOOR SERVICE HOLE COVER

    Click here

  5. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY

    Click here

  6. REMOVE REAR DOOR REAR GUIDE SEAL

    Click here

  7. REMOVE REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  8. REMOVE REAR DOOR GLASS RUN

    Click here

  9. REMOVE REAR DOOR LOCK ASSEMBLY


    1. A005H3T

      Using a T30 "TORX" wrench, remove the 3 screws.

    2. A005HR9E01
      Text in Illustration
      *1 Release Plate
      A005GO2 Slide Direction

      Slide the rear door lock assembly downward, and remove the rear door lock assembly from the release plate.

    3. A005I1F

      Remove the door lock wire harness seal from the rear door lock assembly.

  10. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY


    1. A005M26E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws.

    2. A005GHI

      Remove the rear door lock remote control cable assembly from rear door lock assembly.

  11. REMOVE REAR DOOR INSIDE LOCKING CABLE ASSEMBLY


    1. A005ICVE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws.

    2. A005IFU

      Remove the rear door inside locking cable assembly from rear door lock assembly.