FRONT DOOR LOCK INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Double Locking System)


    1. A005IJLE06
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)
      *b Lock
      *c Unlock

      Check the operation of the front door lock motor.


      1. Apply battery voltage and check the operation of the front door rock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 1 (UL)

        		 Locked

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 4 (L)

        		 Unlocked

        If the result is not as specified, replace the front door lock assembly LH.

    2. Check the resistance of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

    3. A005JQCE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)
      *b Lock
      *c Neutral Position
      *d Unlock

      Check the resistance of the door lock and unlock switch. (for LHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (E) - 9 (L) Locked Below 1 Ω
        Unlocked 10 kΩ or higher
        7 (E) - 10 (UL) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

  2. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Double Locking System)


    1. A005IJLE08
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)
      *b Lock
      *c Unlock

      Check the operation of the front door lock motor.


      1. Apply battery voltage and check the operation of the front door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 3 (UL)

        		 Locked

        Battery positive (+) → 3 (UL)

        Battery negative (-) → 4 (L)

        		 Unlocked

        If the result is not as specified, replace the front door lock assembly LH.

    2. Check the resistance of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

    3. A005JQCE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)
      *b Lock
      *c Neutral Position
      *d Unlock

      Check the resistance of the door lock and unlock switch. (for LHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (E) - 9 (L) Locked Below 1 Ω
        Unlocked 10 kΩ or higher
        7 (E) - 10 (UL) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

    4. A005GSTE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly LH)

      Check the operation of the double door lock motor.


      1. Apply battery voltage and check the operation of the double door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 2 (DL)

        Battery negative (-) → 1 (UNDL)

        		 Set

        Battery positive (+) → 1 (UNDL)

        Battery negative (-) → 2 (DL)

        		 Unset

        Tech Tips


        • Set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the front door lock assembly LH.

    5. Check the operation of the double lock position switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        5 (E) - 6 (DLSR) Unset 10 kΩ or higher
        Set Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

  3. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Double Locking System)


    1. A005HGEE03
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b Lock
      *c Unlock

      Check the operation of the front door lock motor.


      1. Apply battery voltage and check the operation of the front door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 1 (UL)

        		 Locked

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 4 (L)

        		 Unlocked

        If the result is not as specified, replace the front door lock assembly RH.

    2. Check the resistance of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

    3. A005LIKE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b Lock
      *c Neutral Position
      *d Unlock

      Check the resistance of the door lock and unlock switch. (for RHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        8 (E) - 6 (L) Locked Below 1 Ω
        Unlocked 10 kΩ or higher
        8 (E) - 5 (UL) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

  4. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Double Locking System)


    1. A005HGEE04
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b Lock
      *c Unlock

      Check the operation of the front door lock motor.


      1. Apply battery voltage and check the operation of the front door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 2 (L)

        Battery negative (-) → 1 (UL)

        		 Locked

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 2 (L)

        		 Unlocked

        If the result is not as specified, replace the front door lock assembly RH.

    2. Check the resistance of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

    3. A005LIKE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)
      *b Lock
      *c Neutral Position
      *d Unlock

      Check the resistance of the door lock and unlock switch. (for RHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        8 (E) - 6 (L) Locked Below 1 Ω
        Unlocked 10 kΩ or higher
        8 (E) - 5 (UL) Locked 10 kΩ or higher
        Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

    4. A005GSTE02
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock Assembly RH)

      Check the operation of the double door lock motor.


      1. Apply battery voltage and check the operation of the double door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (DL)

        Battery negative (-) → 3 (UNDL)

        		 Set

        Battery positive (+) → 3 (UNDL)

        Battery negative (-) → 4 (DL)

        		 Unset

        Tech Tips


        • Set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the front door lock assembly RH.

    5. Check the operation of the double lock position switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        9 (DLSR) - 10 (E) Unset 10 kΩ or higher
        Set Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.