DOOR CONTROL TRANSMITTER(w/o Entry and Start System) REMOVAL

CAUTION / NOTICE / HINT

Note

Special caution should be taken when handling precision electronic components.

PROCEDURE


  1. REMOVE TRANSMITTER HOUSING COVER


    1. A005LTME01
      Text in Illustration
      *1 Protective Tape
      *2 Housing Cover

      Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.

      Note


      • Do not use excessive force when prying apart the housing cover.

      • Remove the transmitter housing cover while the switches face downward to prevent the switch knob from falling.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY


    1. A005JPF

      Remove the door control transmitter module set sub-assembly.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.