WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under Normal Condition are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body or Entry & Start / Data List.

    5. According to the display on the tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      RR Door Courtesy SW Rear RH door lock position switch signal / ON or OFF

      ON: Rear RH door is open

      OFF: Rear RH door is closed

      		 -
      RL Door Courtesy SW Rear LH door lock position switch signal / ON or OFF

      ON: Rear LH door is open

      OFF: Rear LH door is closed

      		 -
      Back Door Courtesy SW Back door courtesy switch signal / ON or OFF

      ON: Back door is open

      OFF: Back door is closed

      		 -
      FR Door Lock Pos Front RH door lock position switch signal / UNLOCK or LOCK

      UNLOCK: Front RH door unlocked

      LOCK: Front RH door locked

      		 -
      FR Door Courtesy Front RH door courtesy light switch signal / ON or OFF

      ON: Front RH door closed

      OFF: Front RH door opened

      		 -
      FL Door Lock Pos Front LH door lock position switch signal / UNLOCK or LOCK

      UNLOCK: Front LH side door unlocked

      LOCK: Front LH side door locked

      		 -
      FL Door Courtesy Front LH door courtesy light switch signal / ON or OFF

      ON: Front LH door closed

      OFF: Front LH door opened

      		 -
      RR Door Lock Pos Rear RH door lock position switch signal / ON or OFF

      ON: Rear RH door unlocked

      OFF: Rear RH door locked

      		 -
      RL Door Lock Pos Rear LH door lock position switch signal / ON or OFF

      ON: Rear LH door unlocked

      OFF: Rear LH door locked

      		 -
      Wireless Control Wireless door lock control function / ON or OFF

      ON: Operating

      OFF: Not operating

      		 -
      Hazard Answer Back Hazard answer-back of wireless / ON or OFF

      ON: Operating

      OFF: Not operating

      		 -
      Open Door Warning Open door warning/ON or OFF

      ON: Operating

      OFF: Not operating

      		 -
      Auto Lock Time Automatic lock time/120 s, 60 s or 30 s

      30 s: 30 seconds

      60 s: 60 seconds

      120 s: 120 seconds

      		 -
      Wireless Buzzer Vol*1 Wireless Buzzer Volume/Level 0, Level 1, Level 2, Level 3, Level 4, Level 5, Level 6, Level 7

      Level 0

      Level 1

      Level 2

      Level 3

      Level 4

      Level 5

      Level 6

      Level 7

      		 -

      • *1: w/o Rear Fog Light and w/ Entry and Start System

      Entry and Start
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ID Code Difference Status of the ID Code Difference / NO or YES

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      C Code Difference Status of the Different Rolling Code / NO or YES

      Yes: Key rolling code not matched to vehicle

      No: Key rolling code matched to vehicle

      		 -

  2. PERFORM ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the tester, perform the Active Test.

    Main Body
    Tester Display Test Part Control Range Diagnostic Note
    Illuminated Entry System Interior light and ignition key cylinder light (Interior light switch is in DOOR position and all doors are closed) ON/OFF -
    Door Lock Operate door lock motor LOCK/UNLOCK LOCK/UNLOCK -