DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus:
Body / (desired system) / Data List.
According to the display on the tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Key Unlock Warning SW | Unlock warning switch signal / ON or OFF | ON: Key is in ignition key cylinder OFF: No key is in ignition key cylinder |
- |
| ACC SW | Ignition switch status / ON or OFF | ON: Ignition switch on (ACC) OFF: Ignition switch off |
- |
| IG SW | Ignition switch status / ON or OFF | ON: Ignition switch to ON OFF: Ignition switch off |
- |
| RR Door Courtesy SW*1 | Rear door courtesy light switch signal / ON or OFF | ON: Rear door opened OFF: Rear door closed |
- |
| RR Door Courtesy SW*2 | Rear RH door courtesy light switch signal / ON or OFF | ON: Rear RH door opened OFF: Rear RH door closed |
- |
| RL Door Courtesy SW*1 | Rear door courtesy light switch signal / ON or OFF | ON: Rear door opened OFF: Rear door closed |
- |
| RL Door Courtesy SW*2 | Rear LH door courtesy light switch signal / ON or OFF | ON: Rear LH door opened OFF: Rear LH door closed |
- |
| Back Door Courtesy SW | Back door courtesy switch signal / ON or OFF | ON: Back door open OFF: Back door closed |
- |
| Back Door Open | Back door open status / Permit or Prohibit | Permit: Back door unlocked Prohibit: Back door locked |
- |
| Door Lock SW-Lock | Door manual lock switch signal/ ON or OFF | ON: Door control switch (for front driver door side) is turned to lock position OFF: Door control switch (for front driver door side) is turned to unlock position |
- |
| Door Lock SW-Unlock | Door manual unlock switch signal/ ON or OFF | ON: Door control switch (for front driver door side) is turned to unlock position OFF: Door control switch (for front driver door side) is turned to lock position |
- |
| Door Key SW-Lock | Door key linked lock switch signal / ON or OFF | ON: Driver side door key cylinder turned to lock position OFF: Driver side door key cylinder not turned |
- |
| D-Door Key SW-Unlock | Door key linked unlock switch signal / ON or OFF | ON: Driver side door key cylinder turned to unlock position OFF: Driver side door key cylinder not turned |
- |
| FR Door Lock Pos | Front RH door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front RH door unlocked LOCK: Front RH locked |
- |
| FR Door Courtesy | Front RH door courtesy light switch signal / ON or OFF | ON: Front RH door closed OFF: Front RH door opened |
- |
| FL Door Lock Pos | Front LH door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front LH side door unlocked LOCK: Front LH side door locked |
- |
| FL Door Courtesy | Front LH door courtesy light switch signal / ON or OFF | ON: Front LH door closed OFF: Front LH door opened |
- |
| Back Door Open Handle SW | Back door open handle switch signal / ON or OFF | ON: Back door open switch pushed OFF: Back door open switch not pushed |
- |
| RR-Door Lock Pos SW | Rear RH door lock position switch signal / ON or OFF | ON: Rear RH door unlocked OFF: Rear RH locked |
- |
| RL-Door Lock Pos SW | Rear LH door lock position switch signal / ON or OFF | ON: Rear LH door unlocked OFF: Rear LH locked |
- |
| Communication Double Locking | Connection status between double door lock ECU and main body ECU / OK or STOP | OK: Connection STOP: No connection |
- |
*1: w/ Rear Fog Light
*2: w/o Rear Fog Light
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Tr/B-Door Lock SW | Back door opener switch assembly (lock switch) / ON or OFF | ON: Back door opener switch assembly (lock switch) pushed OFF: Back door opener switch (lock switch) not pushed |
- |
| Tr/B-Door Unlock SW | Back door opener switch assembly (unlock switch) / ON or OFF | ON: Back door opener switch assembly (unlock switch) pushed OFF: Back door opener switch (unlock switch) not pushed |
- |
ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus:
Body / Main Body / Active Test.
According to the display on the tester, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Trunk and Back-Door Open | Operate back door opener | ON or OFF | - |
| Shock Detection Unlock | Operate door lock motor | Lock or Unlock | - |
| Door Lock | Operate door lock motor | Lock or Unlock | - |
| D-Door Unlock | Operate door lock motor | ON or OFF | - |