POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING WITH THE INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Door Lock / Utility / Customize.

    5. Select the setting by referring to the table below.

      Door Lock
      Display Default Content Setting Relevant ECU
      Auto Lock*1 ON Function that locks all doors when the vehicle speed reaches a certain level. ON/OFF Main body ECU (multiplex network body ECU)
      Auto Lock/Shift*1, *2 OFF Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. ON/OFF
      Auto Unlock/Shift*1, *2 OFF Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON. ON/OFF
      All Unlock/Open-Close*1 ON Function that unlocks the other doors when the driver door is opened within 43 seconds after the ignition switch is turned off. ON/OFF

      *1: w/ Rear Fog Light

      *2: except Manual Transaxle