READ DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under Normal Condition are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Data List.
According to the display on the tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Key Unlock Warning SW | Unlock warning switch / ON or OFF | ON: Ignition key is inserted OFF: Ignition key is not inserted |
- |
| RR Door Courtesy SW*1 | Rear door courtesy light switch signal / ON or OFF | ON: Rear door closed OFF: Rear door opened |
- |
| RL Door Courtesy SW*1 | Rear door courtesy light switch signal / ON or OFF | ON: Rear door closed OFF: Rear door opened |
- |
| RR Door Courtesy SW*2 | Rear RH door courtesy light switch signal / ON or OFF | ON: Rear RH door closed OFF: Rear RH door opened |
- |
| RL Door Courtesy SW*2 | Rear LH door courtesy light switch signal / ON or OFF | ON: Rear LH door closed OFF: Rear LH door opened |
- |
| Back Door Courtesy SW | Back door courtesy switch signal / ON or OFF | ON: Back door is open OFF: Back door is closed |
- |
| FR Door Lock Pos | Front RH door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front RH door unlocked LOCK: Front RH door locked |
- |
| FR Door Courtesy | Front RH door courtesy light switch signal / ON or OFF | ON: Front RH door closed OFF: Front RH door opened |
- |
| FL Door Lock Pos | Front LH door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front LH side door unlocked LOCK: Front LH side door locked |
- |
| FL Door Courtesy | Front LH door courtesy light switch signal / ON or OFF | ON: Front LH door closed OFF: Front LH door opened |
- |
| Wireless Control | Wireless door lock control function / ON or OFF | ON: Operating OFF: Not operating |
- |
| Hazard Answer Back | Hazard answer-back of wireless / ON or OFF | ON: Operating OFF: Not operating |
- |
| Auto Lock Time | Automatic lock time / 30 s, / 60 s / 120 s | 30 s: 30 seconds 60 s: 60 seconds 120 s: 120 seconds |
- |
*1: w/ Rear Fog Light
*2: w/o Rear Fog Light
PERFORM ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Active Test.
According to the display on the tester, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Interior light and ignition key cylinder light (Interior light switch is in DOOR position and all doors are closed) | ON/OFF | - |
| Door Lock | Operate door lock motor LOCK/UNLOCK | LOCK/UNLOCK | - |